Lennard-Jones model: Difference between revisions

From SklogWiki
Jump to navigation Jump to search
m (→‎Related models: Added an internal link to the Kihara potential)
m (Updated references.)
Line 1: Line 1:
The '''Lennard-Jones''' [[intermolecular pair potential]] is a special case of the [[Mie potential]] and takes its name from  [[ Sir John Edward Lennard-Jones KBE, FRS | Sir John Edward Lennard-Jones]]  
The '''Lennard-Jones''' [[intermolecular pair potential]] is a special case of the [[Mie potential]] and takes its name from  [[ Sir John Edward Lennard-Jones KBE, FRS | Sir John Edward Lennard-Jones]]  
<ref>[http://dx.doi.org/10.1088/0959-5309/43/5/301 J. E. Lennard-Jones, "Cohesion",  Proceedings of the Physical Society, '''43''' pp. 461-482 (1931)] </ref>.
<ref>[http://dx.doi.org/10.1098/rspa.1924.0081  John Edward Lennard-Jones "On the Determination of Molecular Fields. I. From the Variation of the Viscosity of a Gas with Temperature", Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character '''106''' pp. 441-462 (1924)] &sect; 8 (ii)</ref> <ref>[http://dx.doi.org/10.1098/rspa.1924.0082 John Edward Lennard-Jones "On the Determination of Molecular Fields. II. From the Equation of State of a Gas",  Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character '''106''' pp. 463-477 (1924)] Eq. 2.05</ref>
The Lennard-Jones [[models |model]] consists of two 'parts'; a steep repulsive term, and
The Lennard-Jones [[models |model]] consists of two 'parts'; a steep repulsive term, and
smoother attractive term, representing the London dispersion forces. Apart from being an important model in its-self,
smoother attractive term, representing the London dispersion forces. Apart from being an important model in its-self,

Revision as of 15:48, 19 November 2009

The Lennard-Jones intermolecular pair potential is a special case of the Mie potential and takes its name from Sir John Edward Lennard-Jones [1] [2] The Lennard-Jones model consists of two 'parts'; a steep repulsive term, and smoother attractive term, representing the London dispersion forces. Apart from being an important model in its-self, the Lennard-Jones potential frequently forms one of 'building blocks' of may force fields,

Functional form

The Lennard-Jones potential is given by

Φ12(r)=4ϵ[(σr)12−(σr)6]

where

  • r:=|r1−r2|
  • Φ12(r) is the intermolecular pair potential between two particles or sites
  • σ is the diameter (length), i.e. the value of r at which Φ12(r)=0
  • ϵ is the well depth (energy)

In reduced units:

  • Density: ρ*:=ρσ3, where ρ:=N/V (number of particles N divided by the volume V)
  • Temperature: T*:=kBT/ϵ, where T is the absolute temperature and kB is the Boltzmann constant

The following is a plot of the Lennard-Jones model for the parameters ϵ/kB≈ 120 K and σ≈ 0.34 nm. See argon for different parameter sets.

This figure was produced using gnuplot with the command:

plot (4*120*((0.34/x)**12-(0.34/x)**6))

Special points

  • Φ12(σ)=0
  • Minimum value of Φ12(r) at r=rmin;
rminσ=21/6≃1.12246...

Critical point

The location of the critical point is [3]

Tc*=1.326±0.002

at a reduced density of

ρc*=0.316±0.002.

Vliegenthart and Lekkerkerker [4] have suggested that the critical point is related to the second virial coefficient via the expression

B2|T=Tc=−πσ3

Triple point

The location of the triple point as found by Mastny and de Pablo (Ref. 4) is

Ttp*=0.694
ρtp*=0.84 (liquid); ρtp*=0.96 (solid)

Approximations in simulation: truncation and shifting

The Lennard-Jones model is often used with a cutoff radius of 2.5σ, beyond which Φ12(r) is set to zero. See Mastny and de Pablo [5] for an analysis of the effect of this cutoff on the melting line.

n-m Lennard-Jones potential

It is relatively common to encounter potential functions given by:

Φ12(r)=cn,mϵ[(σr)n−(σr)m].

with n and m being positive integers and n>m. cn,m is chosen such that the minimum value of Φ12(r) being Φmin=−ϵ. Such forms are usually referred to as n-m Lennard-Jones Potential. For example, the 9-3 Lennard-Jones interaction potential is often used to model the interaction between the atoms/molecules of a fluid and a continuous solid wall. On the '9-3 Lennard-Jones potential' page a justification of this use is presented. Another example is the n-6 Lennard-Jones potential, where m is fixed at 6, and n is free to adopt a range of integer values. The potentials form part of the larger class of potentials known as the Mie potential.

Radial distribution function

The following plot is of a typical radial distribution function for the monatomic Lennard-Jones liquid (here with σ=3.73Å and ϵ=0.294 kcal/mol at a temperature of 111.06K):

Typical radial distribution function for the monatomic Lennard-Jones liquid.
Typical radial distribution function for the monatomic Lennard-Jones liquid.
  1. John G. Kirkwood, Victor A. Lewinson, and Berni J. Alder "Radial Distribution Functions and the Equation of State of Fluids Composed of Molecules Interacting According to the Lennard-Jones Potential", Journal of Chemical Physics 20 pp. 929- (1952)

Equation of state

Main article: Lennard-Jones equation of state

Virial coefficients

Main article: Lennard-Jones model: virial coefficients

Phase diagram

Main article: Phase diagram of the Lennard-Jones model

Perturbation theory

The Lennard-Jones model is also used in perturbation theories, for example see: Weeks-Chandler-Anderson perturbation theory.

Mixtures

Related models

References