Lennard-Jones model

The Lennard-Jones intermolecular pair potential is a special case of the Mie potential and takes its name from Sir John Edward Lennard-Jones . The Lennard-Jones model consists of two 'parts'; a steep repulsive term, and smoother attractive term, representing the London dispersion forces . Apart from being an important model in itself, the Lennard-Jones potential frequently forms one of 'building blocks' of many force fields. It is worth mentioning that the 12-6 Lennard-Jones model is not the most faithful representation of the potential energy surface, but rather its use is widespread due to its computational expediency. For example, the repulsive term is maybe better described with the exp-6 potential. One of the first computer simulations using the Lennard-Jones model was undertaken by Wood and Parker in 1957 in a study of liquid argon.

Functional form

The Lennard-Jones potential is given by

$\Phi _{12}(r)=4\epsilon \left[\left({\frac {\sigma }{r}}\right)^{12}-\left({\frac {\sigma }{r}}\right)^{6}\right]$

where

• $r:=|\mathbf {r} _{1}-\mathbf {r} _{2}|$
• $\Phi _{12}(r)$ is the intermolecular pair potential between two particles or sites
• $\sigma$ is the value of $r$ at which $\Phi _{12}(r)=0$
• $\epsilon$ is the well depth (energy)

In reduced units:

• Density: $\rho ^{*}:=\rho \sigma ^{3}$, where $\rho :=N/V$ (number of particles $N$ divided by the volume $V$)
• Temperature: $T^{*}:=k_{B}T/\epsilon$, where $T$ is the absolute temperature and $k_{B}$ is the Boltzmann constant

The following is a plot of the Lennard-Jones model for the Rowley, Nicholson and Parsonage parameter set ($\epsilon /k_{B}=$ 119.8 K and $\sigma =$ 0.3405 nm). See argon for other parameter sets.

Special points

• $\Phi _{12}(\sigma )=0$
• Minimum value of $\Phi _{12}(r)$ at $r=r_{min}$;

${\frac {r_{min}}{\sigma }}=2^{1/6}\simeq 1.12246...$

Critical point

The location of the critical point is

$T_{c}^{*}=1.326\pm 0.002$

at a reduced density of

$\rho _{c}^{*}=0.316\pm 0.002$.

Vliegenthart and Lekkerkerker have suggested that the critical point is related to the second virial coefficient via the expression

$B_{2}\vert _{T=T_{c}}=-\pi \sigma ^{3}$

Triple point

The location of the triple point as found by Mastny and de Pablo is

$T_{tp}^{*}=0.694$

$\rho _{tp}^{*}=0.84$ (liquid); $\rho _{tp}^{*}=0.96$ (solid)

Radial distribution function

The following plot is of a typical radial distribution function for the monatomic Lennard-Jones liquid (here with $\sigma =3.73{\mathrm {\AA} }$ and $\epsilon =0.294$ kcal/mol at a temperature of 111.06K):

Typical radial distribution function for the monatomic Lennard-Jones liquid.

Helmholtz energy function

An expression for the Helmholtz energy function of the face centred cubic solid has been given by van der Hoef , applicable within the density range $0.94\leq \rho ^{*}\leq 1.20$ and the temperature range $0.1\leq T^{*}\leq 2.0$. For the liquid state see the work of Johnson, Zollweg and Gubbins .

Equation of state

Main article: Lennard-Jones equation of state

Virial coefficients

Main article: Lennard-Jones model: virial coefficients

Phase diagram

Main article: Phase diagram of the Lennard-Jones model

Zeno line

It has been shown that the Lennard-Jones model has a straight zeno line on the density−temperature plane.

Perturbation theory

The Lennard-Jones model is also used in perturbation theories, for example see: Weeks-Chandler-Anderson perturbation theory.

Approximations in simulation: truncation and shifting

The Lennard-Jones model is often used with a cutoff radius of $2.5\sigma$, beyond which $\Phi _{12}(r)$ is set to zero. Setting the well depth $\epsilon$ to be 1 in the potential on arrives at $\Phi _{12}(r)\simeq -0.0163$, i.e. at this distance the potential is at less than 2% of the well depth. For an analysis of the effect of this cutoff on the melting line see the work of Mastny and de Pablo and of Ahmed and Sadus . See Panagiotopoulos for critical parameters . It has recently been suggested that a truncated and shifted force cutoff of $1.5\sigma$ can be used under certain conditions -

n-m Lennard-Jones potential

It is relatively common to encounter potential functions given by:

$\Phi _{12}(r)=c_{n,m}\epsilon \left[\left({\frac {\sigma }{r}}\right)^{n}-\left({\frac {\sigma }{r}}\right)^{m}\right].$

with $n$ and $m$ being positive integers and $n>m$. $c_{n,m}$ is chosen such that the minimum value of $\Phi _{12}(r)$ being $\Phi _{min}=-\epsilon$. Such forms are usually referred to as n-m Lennard-Jones Potential. For example, the 9-3 Lennard-Jones interaction potential is often used to model the interaction between a continuous solid wall and the atoms/molecules of a liquid. On the '9-3 Lennard-Jones potential' page a justification of this use is presented. Another example is the n-6 Lennard-Jones potential, where $m$ is fixed at 6, and $n$ is free to adopt a range of integer values. The potentials form part of the larger class of potentials known as the Mie potential.
Examples:

• 8-6 Lennard-Jones potential
• 9-3 Lennard-Jones potential
• 9-6 Lennard-Jones potential
• 10-4-3 Lennard-Jones potential
• 200-100 Lennard-Jones potential
• n-6 Lennard-Jones potential

Mixtures

• Binary Lennard-Jones mixtures
• Multicomponent Lennard-Jones mixtures

Related models

• Kihara potential
• Lennard-Jones model in 1-dimension (rods)
• Lennard-Jones model in 2-dimensions (disks)
• Lennard-Jones model in 4-dimensions
• Lennard-Jones sticks
• Mie potential
• Soft-core Lennard-Jones model
• Soft sphere potential
• Stockmayer potential